Pacbrake Air Springs and Air Bag SuspensionYour truck’s suspension was designed as a compromise between capability and comfort. So when you haul heavy loads or pull a trailer, the rear springs can be pushed to the limit–resulting in excessive bounce, sagging ride height, and an overall feeling of instability. It doesn’t have to be this way. With the simple addition of a Pacbrake air suspension kit, you can inflate the air springs enough to support the load without overtaxing the suspension, resulting in a level stance, comfortable ride and confident handling. 
Pacbrake has been in the business of building heavy-duty products for OEMs and the aftermarket for 50 years now, so introducing “just another air suspension” simply wouldn’t do. The air springs in Pacbrake air suspension systems are made from double convoluted two-ply rubber, and are the only air bags on the market with one-inch aluminum end caps and 18 support wires for maximum strength and durability.
  
ADDING ONBOARD AIR FOR EASIER OPERATIONAdding air to your Pacbrake air suspension system is easy, too. With the standard manual fill kit, you add air manually with the fill valves located near your rear license plate. Or, for more convenience, choose an onboard air compressor system that will allow you to adjust and monitor your air spring pressure right from the driver’s seat. You’ve compromised long enough. You deserve the better ride, level stance and confident handling that comes from a Pacbrake air suspension system. Find what you’re looking for with our application guide and choose your system today.
 | Pacbrake offers 2", 4" and 6" spacer kits that are designed to be used when the distance of the upper and lower mounting locations of the air springs have increased due to changing the axle block or springs packs. |
Application GuidesAir Suspension Kit Guide
Read More About This Product
|
